Graphite Sintering crucible mould for power metallurgy and Hard Alloy is processed from high quality synthetic graphite. Mainly used in graphite trays, graphite boats, graphite heating elements, graphite heating tubes, conductive rods, graphite furnace bottoms, graphite bolts and nuts, graphite supports, vacuum resistance furnaces, carbon tube furnaces, induction furnaces, sintering furnaces, brazing furnaces, ions Nitriding furnace, tantalum graphite mold. Melting furnace, vacuum quenching.

Technical Information Of Graphite Mould For Metallurgy:

Bulk density: g/cm3 1.75-1.90 lbs/ft3 110-119
Porosity rate: 10-15% 10-15
Bending strength: MPa 30-40/psi 4350-5800
Compressive strength: MPa 60-80/psi 8700-11600
Ash:%0.1